Loepfe YarnMaster Zenit - Page 58

58
ZENIT
MONITORING DATA
Last Cut Display
Splice cut Channel Splice CH / N S L T (Neps, Short, Long, Thin)
Splice cut Class Splice CL / N S L T (Neps, Short, Long, Thin)
Channel cut Channel / N S L T (Neps, Short, Long, Thin)
Nonclassified channel cut [Channel] / N S L T (Neps, Short, Long, Thin)
Class cut Class / N S L T (Neps, Short, Long, Thin)
Cut outside of indicated class fields (Class) / N S L T (Neps, Short, Long, Thin)
Foreign matter cut F / Dark, Bright
Foreign matter cut during splice check F Splice / Dark, Bright
Foreign matter cluster cut F Cluster / Dark, Bright
Foreign matter cut PP, PE etc. P
Short Cluster cut Cluster / S
Long Cluster cut Cluster / L
Thin Cluster cut Cluster / T
Surface Index cut SFI/D / +, –
VCV cut VCV / +, –
Off Count cut Off Count / +, –
Short Off Count cut Short Count / +, –
Base calibration cut Adjust
Upper Yarn cut Upper Yarn
Yarn bunch cut Bunch
Delayed yarn bunch cut DBunch
Machine cut Additional
Run-out with yarn fault Cut
Run-out without yarn fault No Cut
Drum wrap cut Drum Wrap
Cut startup Startup
System, test button, before Adjust System