Logicube ZClone Xi User Manual

QUICK START
Logicube ZClone™Xi User’s Manual 18
Continue adding operations desired. Each operation added will appear on the list. To
delete an operation, tap the X to the right of the operation.
When finished, tap the OK icon. A summary of the macro will be seen:
To start the macro and have the unit perform all the operations on the task list, tap the
Start icon in the Task Macro screen.
Example: Setting up a Macro for a Wipe to Secure Erase then perform a Drive to
Drive Clone
To set a macro to perform a Wipe using Secure Erase on T1, immediately followed by
performing a Drive to Drive Clone from M1 to the newly wiped (secure erased) drive
on T1, the Wipe and Clone Tasks first need to be set up.
1. First, set the Wipe task. Select T1 as the Target and change the setting to
perform a Secure Erase (Wipe Patterns and Format set to off). Do not start
this task.

Logicube ZClone Xi Specifications

General

Brand	Logicube
Model	ZClone Xi
Category	Disc Duplicator
Language	English