13
Target Region Descriptor
During tuning your TV may have received signals
from more than one transmitter. If this has occurred
the Target Region Descriptor screen will be displayed.
This will enable you to select the correct regional
transmission for the local news service that you
require.
1. Press the buttons to adjust each option’s
setting and then press the OK button to conrm.
Country This will be shown as UK for the UK.
Primary
Region
This will show the regional country
(e.g. England, Wales, Scotland, NI).
Secondary
Region
This will allow you to set the region
for your local news service.
Tertiary
Region
You may receive signals from more
than one transmitter within the
Secondary Region (e.g Beds and
Cambs may have Luton or Sandy
Heath).
2. When the tuning is complete, a message will be
displayed on the screen. Press the OK button to
restart the unit after 3-5 seconds. The channels
are arranged in a preset order. When the search
progress is completed, you can watch saved
broadcasts after the restart process.
4. Press the buttons to select Ye s and then press
the OK button to begin automatic channel scan.
5. The tuning progress screen will be displayed,
showing you how many channels have been
found and saved. The tuning may take several
minutes to complete. You can press the MENU
button to cancel the auto tuning.
L1HSTB12_IB_120725_CS4_Edits_Pauline.indd 13 30/07/2012 14:57
To Next Page
Loading...
General