EasyManuals Logo

Logik L1HSTB12 User Manual

Logik L1HSTB12
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
48
3. Press the buttons to select IP Settings and
then press the OK button. The IP Settings menu
will be displayed.
2. Press the buttons to select Setup and then
press the OK button. The Setup menu will be
displayed.
IP (Internet Protocol) Installation Setup
1. Press the MENU button to display the main
menu.
4. Press the RED button to Disable IP conguration.
If your broadband modem/router is not compatible with DHCP (Dynamic Host
Conguration Protocol), you will need to set the addresses manually. Press the YELLOW
button to change the conguration to Static and for each of the addresses in turn (IP
Address, Subnet Mask, Router Address, and DNS Address). It is necessary to congure the
IP settings to enable access to On Demand services such as BBC iPlayer.
In order for the ethernet host to work correctly with your internet connection. It needs to
have a unique IP address. Press the BLUE button to set to Dynamic.
5. Press the BACK button to return to the previous menu or the MENU button to exit.
Please check the user manual for your modem/router for this information.
L1HSTB12_IB_120725_CS4_Edits_Pauline.indd 48 30/07/2012 14:57

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Logik L1HSTB12 and is the answer not in the manual?

Logik L1HSTB12 Specifications

General IconGeneral
BrandLogik
ModelL1HSTB12
CategoryDVR
LanguageEnglish