Logik L1HSTB12 User Manual

30
Channel List Setting
1. Press the MENU button to display the main
menu.
2. Press the buttons to select Channel List
and then press the OK button. The Channel List
menu will be displayed.
• When a channel is locked, a valid password must be entered. The default
password is “0000”.
• If you change the password, be sure to remember the new password! If you
forget the new password, press the master password “4725”.
You can press the OK button to display
the Channel List directly.
Delete Channel
1. Press the buttons to select the desired channel you want to delete.
2. Press the buttons to select Delete and then press the OK button.
3. A message will be displayed on the screen. Press the buttons to select YES to conrm
or NO to exit the menu.
Select Channel
1. Press the buttons to select the channel.
2. Press the buttons to select Select and then press the OK button to watch.
L1HSTB12_IB_120725_CS4_Edits_Pauline.indd 30 30/07/2012 14:57

Logik L1HSTB12 Specifications

General

Brand	Logik
Model	L1HSTB12
Category	DVR
Language	English