47
3. Press the buttons to select Installation and
then press the OK button. The Installation menu
will be displayed.
2. Press the buttons to select Setup and then
press the OK button. The Setup menu will be
displayed.
Installation Setup
1. Press the MENU button to display the main
menu.
4. Use the buttons to select the following options and then press the OK button.
Automatic
Channel
Scan /
Retune
Use this to automatically nd and store all available channels. This is
normally recommended if some channels have been added or removed
by the broadcaster or if you have moved house.
Manual
Channel
Scan
Allows you to make manual ne tuning adjustments to the channel.
Format
Disk
Format the internal hard disk. To access the menus, you must enter the
password. Enter the default password “0000” for rst time use. If you
change the password, be sure to remember the new password! If you
forget the new password, press the master password “4725”.
All data stored on the hard disk will be lost.
First Time
Installation
Restores all settings to the factory defaults.
All channel and user settings will be lost and the unit will
revert to "First Time Installation".
5. Press the BACK button to return to the previous menu or the MENU button to exit.
L1HSTB12_IB_120725_CS4_Edits_Pauline.indd 47 30/07/2012 14:57
To Next Page
Loading...
General