20
Recording
Make sure that the unit’s built-in HDD has enough available memory space.
• If you want to turn o your unit during recording, press the Standby button.
The LED display will show the time.
• When the programme is recording, please do not unplug the unit from the mains
socket as this will damage the unit’s HDD.
• When two recordings are active, you can only watch recorded channels. You are
only allowed to schedule up to 2 events for Instant Record at any one time.
Instant Recording
Use this function to record the TV programme you are watching on the main screen and save
them for future viewing.
1. Press the button to record the programme that
you are currently watching, Instant Recording
screen will be displayed for a short time.
2. Press the button to stop recording and then
press the buttons to select YES to stop
recording.
EPG Recording
This allows you to preset some programmes to be recorded in standby mode or on mode. For
more details, please refer to the section Programme Guide (EPG).
L1HSTB12_IB_120725_CS4_Edits_Pauline.indd 20 30/07/2012 14:57
To Next Page
Loading...
General