20 The GS550 System
Figure 7 Chart Wizard: Steps 1 to 5 should be followed to select the capacity chart
2.4 Display Settings
Program the display for operator preferences in menu 3) Display Settings.
2.4.1 Weight Units
The weight units for load display may be selected according to operator preference. Length units
are associated with weight units by default; see table 2.
1. Press Menu, and then Next twice.
2. Press Enter to go to menu 3A) Weight units.
3. Use Up and Down to select the weight units for load display.
4. Press Next to advance to the language adjustment page or press Exit twice to return to the
operation display.
Unit Notes Equivalent Weight Length Unit
Pound (lb) 1 lb 0.4536 kg Foot (ft.)
Kilogram (kg) 2.205 lb 1 kg Metre (m)
Short ton (T) United States 2000 lb 907.2 kg Foot (ft.)
Long ton (T) United Kingdom 2240 lb 1016 kg Foot (ft.)
Tonne (t) International System (SI) 2205 lb 1000 kg Metre (m)
Table 2 Weight Units
2.4.2 Language
Future versions of the GS550 will include different display language options.
5. Press Menu, and then Next twice.
6. Press Enter, and then Next twice to go to menu 3B) Display language.
7. Press Up and Down to change the display language