4. Certification Notes 61
Models
(Continued)
Battery
Type
(Continued)
Par Number
(Continued)
Manufacturer
(Continued)
Voltage Per
Cell
(Continued)
Temperature
Code
(Continued)
GS001-ATEX-CE
GS002-ATEX-CE
GS005-ATEX-CE
GS010-01-ATEX-
CE GS010-02-
ATEX-CE
GS010-03-ATEX-
CE GS-011-
ATEX-CE
GS020-ATEX-CE
D
TL-5930 Tadiran 3.6V T4
GS050-ATEX-CE C PC1400 Tadiran 1.5V
T 150 °C
Sensors: GCxxx-ATEX-CE series sensors, GS001-ATEX-CE, GS002-ATEX-CE, GS010-ATEX-
CE, GS011-ATEX-CE, GS020-ATEX-CE, GS005-ATEX-CE, GS050-ATEX-CE (all intrinsically
safe):
II 1 G Ex ia IIC T4
GS550-ATEX-CE display:
II 3 G ExnA II T4
4.3 Ensuring Safe Operation in Hazardous Areas
Warning!
Equipment must be correctly installed according to the instructions desbribed in the Installation
Manual, Installation chapter, page 4.
lways ensure the system works properly, and then test all componenents before using the crane.
A description of display status and warning lights is available in the Operation chapter, page 10 of
this manual.
4.4 Product Repair And Servicing
LSI products have no replaceable or user’s serviceable parts, except the antenna (Installation
Manual, page 10) and the batteries (Installation Manual, page 42). Suggested maintenance
instructions of load cells are described on page 14 of the Installation Manual. For any other
suspected problems, damage or required servicing, please contact your closest LSI office. Refer
to LSI contact information as mentioned on page 52 of the Installation Manual.