4. Certification Notes 69
Datasheets:
The following figures show all sensors, load cells and display available including the temperature
and humidity levels. In addition, it is to mention that the ingress protection (IP) of equipment
corresponds to 65. The ingress protection of equipment is an "international classification system
for sealing effectiveness of enclosures". The first digit indicates "degree that persons are protected
against contact with moving parts (other than smooth rotating shafts, etc.) and the degree that
equipment is protected against solid foreign bodies intruding into an enclosure". The second digit
of the IP code of equipment indicates "the degree of protection of the equipment inside the enclo-
sure against the harmful entry of various forms of moisture (e.g. dripping, spraying, submersion,
etc.)". Also, it is useful to know that an "X is used for one of the digits if there is only one class of
protection; i.e., IP X4 which addresses moisture resistance only.)"
1
Important!
Measurements are subject to change. To have the exact measurement, please visit our
website.
Figure 39 GC005 Wireless Load Cell
1. http://www.interpower.com/ic/IP_codes_info.asp