56 The GS550 System
The PDA doesn’t respond. If the PDA doesn’t appear to respond to commands or if prob-
lems occur during a transfer operation then the PDA can be reset by pressing the reset but-
ton on the back. All applications will then restart; data should not be lost.
To Free Up Memory
1. Power up the Palm. With the plastic pen, press on the Home icon on the lower left side of
the screen until an icon called "LS420 Download" is visible.
2. Press on the LS420 Download icon. A list of available files will be displayed.
3. Press on the file to be deleted
4. Press on the delete button
3.4 Data Logger Viewer
The Datalogger Viewer (see Figure 34) is a software application used to display on a personal
computer (PC) a log file generated by the GS550 data logger. To transfer data logger files from a
GS550 to a PC see the section “Transferring Files”.
The Data logger viewer opens the log file, converts it from a PDA database file to a text (binary)
file, and then displays the contents. Two reports can be produced and transferred to Excel, the full
report and the wind speed report
*
.
Figure 34 Datalogger Viewer System
3.4.1 Installation on a Personal Computer
Install the CD in a CD-ROM drive. The interactive installation process should start automatically
within 30 seconds; if not then:
1. Click Start.
2. Click My Computer.
3. Double-click the CD-ROM drive.
4. Double-click setup.exe.
5. Complete the installation as instructed on screen.
3.4.2 Quick Start
1. Select the Datalogger Viewer application from the Start menu of the personal computer (see
Figure 35).
*
The wind report is only available when the data logger has recorded in the automatic recording
mode.
To Next Page
Loading...
Need help?
General
