60 The GS550 System
4.2 Important Notes for Hazardous Area Certified Components
Warning!
1. Understand manual before operation.
2. Replace batteries only in a non-hazardous area.
Specifications
For all sensors except the GS050-CSA & GS050-ATEX-CE, use 3.6V lithium batteries, Ta-
diran TL-5930 model.
For GS050-CSA & GS050-ATEX-CE anti-two-block switches, use only alkaline ‘C’ batteries,
Duracell 1.5 volts PC1400 model.
Warning!
1. Substitution of components may intrinsic safety.
2. Substitution of components may impair suitability for Class I, Division 2.
3. Do not remove power cable from display when on.
Specifications
Here is one table that specifies which type of battery should be used for a particular component or
component model. Please follow this table and each specification recommended.
Models Battery
Type
Par Number Manufacturer Voltage
Per Cell
Temperature
Code
GC005-ATEX-CE
GC012-ATEX-CE
GC018-ATEX-CE
GC035-ATEX-CE
GC060-ATEX-CE
GC100-ATEX-CE
GC170-ATEX-CE
D TL-5930 Tadiran 3.6V T4