7
Warning!
This device is intended as an operator aid only and is not a substitute for safe operating
practices. Read the Master User’s Manual.
Test before every use.
Master User's Manual Convention
Warning means that there is a possible
danger. This action should be performed in
order to meet the proper operation, and it is
performed not to break the system. If this is not
followed, some failures or breaks can occur.
Also, to emphasize the word Warning, this word
is preceded by the
icon.
Important means that an important note is
mentioned in order to catch the user’s attention
on the correct way to use or to maintain the
system, that is to say Good Manufacturing
Practices. This is icon-illustrated with
.
Note means a notice or note to the installer in
order to inform him or her about the installation,
for example, or it reflects an informative
statement on the product.
Tip is given in order to make the system
easy-to-use or to ease the maintenance
procedures. This is icon-illustrated with
.
CE and ATEX Certifications
For information on CE and ATEX Certifications,
please refer to sections relative on certification
and declaration of conformity.
Safe Operation in Hazardous Area
For information on Safe Operation Hazardous
Area, refer to the Safe Operation Hazardous
Area sub-section.
Equipment Marking
The Equipment Marking section describes
regulations or standards used.
To Next Page
Loading...
Need help?
General
