Lucent Technologies DDM-2000 OC-12 User Manual

Order:Circuit363-206-295 NTP-008
14of3Page1997December1,Issue
LISTEDORDERINBELOWITEMSDO .... TOGODETAILS,FOR
5.
NOTE:
The rtrv-oc3: theretrievescommand LineOC-3
ReportProvisioning eachaboutinformationlistsreportThis.
OC-12thebysetattributesincludesinformationThisline.OC-3/IS-3
set-oc3: (applicationsThecommand.
app theofparameter)
set-oc3 tosetbemustcommand
1 + 1 thefor UNITSFUNCTION
Seeshelf.OC-12theinextensionOC-3/IS-3theforusedbeingslots
363-206-295,ofsectionReports"and"Commandsthe
DDM-2000
IManual—VolumeUser/Service7,ReleaseTARPMultiplexer,OC-12
,
theofdescriptionafor rtrv-oc3: format.command
theUse rtrv-oc3/set-oc3: OC-12theatcommand
toparameterapplicationstheverify/settoshelf
1 + 1 .
example,(For
set-oc3:fn-{a,b,c,d,all},app=
1 + 1 )
6.
NOTE:
thethroughconnectedbemustshelvesOC-3DDM-2000 MAIN or
CUNITSFUNCTION timingderivingisnetworkorshelftheifslots
Seenetwork.OC-12thetolinksopticalOC-3/IS-3thefrom
theofdescription src inparameter set-sync: 363-incommand
206-285,
13,ReleaseTARPMultiplexer,OC-3DDM-2000
IManual—VolumeUser/Service
.

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English