Lucent Technologies DDM-2000 OC-12 User Manual

NTP-015 363-206-295TurnupSystem:
1997December1,Issue11of6Page
LISTEDORDERINBELOWITEMSDO .... TOGODETAILS,FOR
theUse rtrv-sync: theobtaintocommand
ReportSynchronization Syncifverifyand
theUsedisabled.orenabledisAutoreconfiguration
set-sync: Syncthedisableorenabletocommand
required.asparameter,Autoreconfiguration
Theexist.settingsTIDduplicatenoVerify rtrv-map-
network theinshelfeachatusedbemaycommand
determineexist,duplicatesIfsettings.displaytonetwork
theuseandsettingsnew set-ne maketocommand
settings.new
11.
12.
NOTE:
connectwillthatshelfDDM-2000theenabled,isreconfigurationautoIf
theviaFT-2000theto MAIN-B-1 DDM-2000theoffirstthebeshould
toconnectingshelfDDM-2000theIfFT-2000.thetoconnecttoring
viaFT-2000 MAIN-B-2(P) willshelfDDM-2000thefirst,connectedis
inshelvesDDM-2000subsequentotheallwillasholdoverinremain
viaFT-2000thetoconnectingshelftheuntilringthe MAIN-B-1 is
connected.
thefromloopopticaltheremoveend,neartheAt MAIN
OLIU 2nodeOC-122,Figureinexample(for MAIN-B-1)
Atestablished.beingspanopticalthewithassociated
loopopticaltheremovespan,opticaltheofendotherthe
associatedthefrom OC12T939A (forpackcircuit
FT-20002,Figureinexample, 1AINTFCLS slot).

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English