Lucent Technologies DDM-2000 OC-12 User Manual

TAP-103 363-206-295ClearingTrouble:
1997December1,Issue2of2Page
theIs4. FAULT off?replacedjustpackcircuittheonLED
If YES withcontinuethen, 5Step .
If NO dothen, TAP-106.
lightedthewithpackcircuitprotectiontheReplace5. FAULT LED.
Reference: DLP-518
theIs6. FAULT off?replacedjustpackcircuittheonLED
If YES then, PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.
If NO dothen, TAP-106.
theandCITUse7. )rtrv-( (commands rtrv-state-eqpt toetc.),
etc.locks,inhibits,formodeswitchingcheck
found?troubleanyWas8.
If YES withcontinuethen, 9Step .
If NO dothen, TAP-108.
theSeeplace.inbetoetc.inhibits,locks,forreasonDetermine9.
theofdescriptionaformanualthisofsectionReports"and"Commands
)switch-( theandcommands rtrv-alm reportcommand
theUsedescriptions. )switch-( ormodeswitchingresettocommands
priority.
supporttechnicallocalyoursupervisor,yournotifyassistance,needyouIf
operatinglocalperRTAC,TechnologiesLucentcallororganization,
instructions.
10. PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English