Lucent Technologies DDM-2000 OC-12 User Manual

TAP-106 363-206-295ClearingTrouble:
1997December1,Issue3of2Page
Is7. FAULT lighted?stillpackcircuitaffectedonLED
If YES withcontinuethen, 8Step .
If NO then, PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.
reseated?andunpluggedbeenpackscircuitbothHave8.
If YES toproceedthen, 10Step .
If NO withcontinuethen, 9Step .
affectedtheasgroupsametheinpackcircuitactivereseatandUnplug9.
3.StepfromprocedurethisRepeatLED.lightedthewithpackcircuit
lighted(withoutpackcircuitstandbytheReplace10. ACTIVE sametheinLED)
IfLED.lightedthewithpackcircuitaffectedtheasgroup FAULT onLED
theinpackcircuitactivethereplacelighted,stillispackcircuitaffected
LED.lightedthewithpackcircuitaffectedtheasgroupsame
Reference: DLP-518
Is11. FAULT lighted?stillpackcircuitaffectedonLED
If YES withcontinuethen, 17Step .
If NO then, PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.
available?CITIs12.
If YES withcontinuethen, 13Step .
If NO toproceedthen, 15Step .
andCITUse13. reset resettocommand SYSCTL.
Is14. FAULT lighted?stillpackcircuitaffectedonLED
If YES toproceedthen, 17Step .
If NO then, PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.
15.
NOTE:
reseatingandUnseating SYSCTL aperforms reset whichprocedure
program.softwarerestarts
reseatandUnplug SYSCTL depressnotDopack.circuit UPD/INIT button.

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English