Lucent Technologies DDM-2000 OC-12 - Page 1242

Clearing:Trouble363-206-295 TAP-106
3of3Page1997December1,Issue
Is16. FAULT lighted?stillpackcircuitaffectedonLED
If YES withcontinuethen, 17Step .
If NO then, PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.
17.
!
CAUTION:
Replacing SYSCTL pack.circuitonmemoryinternalupdatinginvolves
toRefer DLP-501 replaceand SYSCTL.
Is18. FAULT lighted?stillpackcircuitaffectedonLED
If YES withcontinuethen, 19Step .
If NO then, PROCEDURETHISCOMPLETEDHAVEYOUSTOP. .
19.
NOTE:
OneDDM-2000.ofwiringbackplaneinbetoappearsproblemThe
swaptoisthisverifytoway SYSCTL withpackcircuitanyand
inpackscircuitcorrespondingwithindicationdiagnosticinconsistent
itpacks,circuitthewithmovesproblemtheIfDDM-2000.another
staysproblemtheIfdefective.ispackscircuitmoreoronethatmeans
circuitthenotbutassembly,entiretheDDM-2000,originalthewith
backplaneprintedahasDDM-2000Thereplaced.beshouldpacks,
field.theinrepairedbecannotand
technicalneedyouIfetc.pins,shortedpins,brokenorbentforCheck
Lucentorgroupsupporttechnicalregionalyourcallassistance,
manual.thisoffrontinlistednumberRTACTechnologies
20. PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.