Lucent Technologies DDM-2000 OC-12

363-206-295 DLP-522
3of1Page1997December1,Issue
Connectors,Fibers,OpticalClean
(LBOs)BuildoutsLightguideand
1.
!
WARNING:
radiation.laserinvisibleemitmayconnectorsopticalUnterminated
opticalwithbeamviewnotDobeam.thetoexposuredirectAvoid
ofperformanceoradjustmentsorcontrolsofUseinstruments.
hazardousinresultmayhereinspecifiedthosethanotherprocedures
exposure.radiation
NOTE:
(connectorsfiberopticalAll ST

lightguidetypes),SCandFC/PC,,
beforecleanedbeshouldequivalentorblocksbuildoutandbuildouts,
followingtheperreconnectionsorconnectionsinitialmaking
particularthisatassembledbeingcomponentstheOnlyinstructions.
cleaned.beshouldtime
connections.maketotimeuntilplaceinplugsandcapsdustallKeep
onconnectorsandfibersopticalClean OLIU LBOs.or
If OLIU21D/21G togo, 2Step .
If OLIU23G/23H using
ST connectors,
togo 7Step .
If OLIU21D-U/21G-U/21G2-U/23G-U/23H-U using
togoLBOs,universal 12Step .
in-lineIf LBO togos, 20Step .
If fiberslightguide togo, 26Step .
ofsideboardwiringprintedOn2. OLIU ofonedisconnectfaceplate,
ST
coupling.faceplatefromconnectors
tissuequalityopticallint-free,withtipsconnectorofsidesandendClean3.
alcohol.isopropylwithmoistened
qualityopticallint-freedry,clean,withagainendconnectorwipeCarefully4.
tissue.