Lucent Technologies DDM-2000 OC-12

DLP-522 363-206-295
1997December1,Issue3of2Page
(8inches3leastataircannedusingconnectorfromdustorlintanyBlow5.
connector.offacefromcm)
6. PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.
Remove7. LBO from OUT onconnector OLIU23G/23H necessary.if,
Reference: DLP-538
offaceplateoncouplingsClean8. OLIU23G/23H pipearotatingbyor
coupling.insidealcohol,isopropylwithmoistenedcleaner,
3leastataircannedusingcoupling,insidefromdustorlintanyBlow9.
coupling.fromcm)(8inches
Install10.
ST connectorofrimonmarkaligningbycouplingontoconnectors
clockwisewithcouplingontoconnectorPushcoupling.inslotwithbody
motion.twist-locking
11. PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.
necessary).(ifbuildoutfromconnectorlightguideRemove12.
andtabunlockingbyblockbuildoutfrombuildoutlightguideRemove13.
necessary).(ifdirectioncounter-clockwiseinturningandinpushing
Reference: DLP-538
awithblocksandbuildouts,connectors,theofsidestheandendtheClean14.
alcohol.isopropylwithdampenedtissuequalityopticallint-free,
dry,clean,awithagainblocksandbuildouts,connector,thewipeCarefully15.
tissue.qualityopticallint-free
usingblocksandbuildouts,connectors,thefromdustorlintanyBlow16.
away.cm)(8inches3leastatheldaircanned
isopropylwithmoistenedcleanerpipeausingblocktheofinsidetheClean17.
alcohol.
3leastataircannedusingblock,theinsidefromdustorlintanyBlow18.
away.cm)(8inches
19. PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.