Lucent Technologies DDM-2000 OC-12 User Manual

DLP-534 363-206-295
1997December1,Issue6of4Page
onbuildoutlightguideInstall2. OUT lightguideUseA.TableSeeconnector.
looptojumpers IN and OUT ofconnectors OLIUMAIN-B-1 B.TableSee.
Response: FAULT flashing.stopsLED ACTIVE (Ifon.remainsLED
flashing, FAULT onLED OHCTL allafteroffgoes
onenumber OLIU looped.)ares
(majorlightedThe MJ (minoror) MN remainsLED)
lighted.
andconnectionscheckcorrect,notareresponsesIf
2.SteprepeatandconnectorsCleanfibers.looping
replacecorrect,notstillareresponsesIf OLIU.
(majorlightedTheComment: MJ (minoror) MN remainsLED)
lighted.
toalarmsandLEDsformoreorminute1takemayIt
theafterstabilize OLIU looped.are(s)
BuildoutsLightguideA.Table
LabelFiberConnectorLightguide
ColorConnectionTypeComcodeCode(LBO)BuildoutOLIU
106312598A3010FdB1523G ST GreenSM-SM
GreenSM-SMSC107406167A3060F1dB1523G-U
107406209A3070F1dB1523G-U ST GreenSM-SM
GreenSM-SMFC/PC107406241A3080F1dB1523G-U
JumpersLightguideSingle-ModeB.Table
Connectors(Feet)LengthComcodeCode
ST-ST2105357727FS1E-E-2
SC-SC2106908247LS1SC-SC-2
FC/PC-FC/PC10106593825LS1FP-FP-10
onbuildoutlightguideInstall3. OUT lightguideUseA.TableSeeconnector.
looptojumpers IN and OUT ofconnectors OLIUMAIN-B-2(P) TableSee.
B.

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English