Lucent Technologies DDM-2000 OC-12 - Page 1529

363-206-295 DLP-534
6of5Page1997December1,Issue
Response: FAULT flashing.stopsLED ACTIVE on.remainsLED
(Major/Minor MJ/MN off.goesalarm)
andconnectionscheckcorrect,notareresponsesIf
3.SteprepeatandconnectorsCleanfibers.looping
replacecorrect,notstillareresponsesIf OLIU It.
toalarmsandLEDsformoreorminute1takemay
theafterstabliize OLIU looped.are(s)
4. PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.
onbuildoutlightguideInstall5. OUT lightguideUseC.TableSeeconnector.
looptojumpers IN and OUT ofconnectors OLIUMAIN-B-1 B.TableSee.
Response: FAULT flashing.stopsLED ACTIVE on.remainsLED
flashing,(If FAULT onLED OHCTL allafteroffgoes
onenumber OLIU looped.)ares
(majorlightedThe MJ (minoror) MN remainsLED)
lighted.
andconnectionscheckcorrect,notareresponsesIf
5.SteprepeatandconnectorsCleanfibers.looping
replacecorrect,notstillareresponsesIf OLIU.
(majorlightedTheComment: MJ (minoror) MN remainsLED)
lighted.
toalarmsandLEDsformoreorminute1takemayIt
theafterstabilize OLIU looped.are(s)
BuildoutsLightguideC.Table
LabelFiberConnectorLightguide
ColorConnectionTypeComcodeCode(LBO)BuildoutOLIU
106312630A3010HdB2023H ST RedSM-SM
RedSM-SMSC106708993A3060HdB2023H-U
106795396A3070HdB2023H-U ST RedSM-SM
RedSM-SMFC/PC106795446A3080HdB2023H-U
onbuildoutlightguideInstall6. OUT lightguideUseC.TableSeeconnector.
looptojumpers IN and OUT ofconnectors OLIUMAIN-B-2(P) TableSee.
B.