363-206-295 DLP-553
21of7Page1997December1,Issue
circuitprotectiontoservicefromswitchtocommandfollowingtheUse13.
pack:
switch-fn:
address
:pri=manual;.
greenTheResponse: ACTIVE circuitprotectiontheonlightsLED
pack.
theusingdirectiondemux)(ormuxtheintesttransmissiontheRepeat14.
command:following
test-trmsn-t3:
address
);demux):dur=((or:dirn=mux .
free)?(errorsuccessfultesttheWas15.
If YES withcontinuethen, 16Step .
If NO toproceedthen, 37Step .
theonrequestsswitchactivecleartocommandfollowingtheUse16.
pack:circuitprotection
switch-fn:
address
:pri=reset;.
The17. DS3 test.transmissionDS3thepassedhastestunderpathcircuit
tested?beenpathsrequiredallHave
If NO withcontinuethen, 18Step .
If YES toproceedthen, 19Step .
tested.betopathnextthefor4StepfromprocedurethisRepeat18.
theUsepoint.cross-connectthefromcordspatchloopingtheRemove19.
rls-lpbk-t3 or rls-lpbk-ec1 theatloopback(s)releasetocommand
required.ifend,far
thedepressmomentarilyDDM-2000,far-end)the(andnear-endtheAt20.
UPD/INIT theoncommand)"update"theuse(orbutton SYSCTL updateto
the SYSCTL.
modeoriginalthethandifferentlysetwasmoderemovalmonitorviolationIf21.
theusingsettingrequiredororiginalthetomodethereprovision3,Stepin
set-t3 additionalanyfor2StepfromprocedurethisRepeatcommand.
tested.betocircuitsDS3
22. PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.
To Next Page
Loading...