Lucent Technologies DDM-2000 OC-12 User Manual

DLP-553 363-206-295
1997December1,Issue21of8Page
connectDDM-2000,near-endthewithassociatedcross-connectiontheAt23.
thetosettestDS3the IN and OUT undercircuitthewithassociatedjacks
test.
transmission.error-freefortesttosettestDS3theUse24.
free)?(errorsuccessfultesttheWas25.
If YES withcontinuethen, 26Step .
If NO toproceedthen, 37Step .
circuitprotectionisandgrouptheonplacedbeingservicefirstthethisIs26.
installed?pack
If YES withcontinuethen, 27Step .
If NO toproceedthen, 31Step .
servicetheUnseat27. 3DS3 test.undercircuitthewithassociatedpackcircuit
set.testDS3thewithtesttransmissionDS3theRepeat28.
free)?(errorsuccessfultesttheWas29.
If YES withcontinuethen, 30Step .
If NO toproceedthen, 37Step .
theReseat30. 3DS3 test.undercircuitthewithassociatedpackcircuit
The31. DS3 test.transmissionDS3thepassedhastestunderpathcircuit
tested?beenpathsrequiredallHave
If NO withcontinuethen, 32Step .
If YES toproceedthen, 33Step .
tested.betopathnextthefor4StepfromprocedurethisRepeat32.
cross-connections.thefromcordspatchloopingtheRemove33.
thedepressmomentarilyDDM-2000,far-end)the(andnear-endtheAt34.
UPD/INIT theonbutton SYSCTL theupdateto SYSCTL.
betocircuitsDS3additionalanyfor2StepfromprocedurethisRepeat35.
tested.
36. PROCEDURE.THISCOMPLETEDHAVEYOUSTOP.

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English