Issue 1 December 1997 6-1
6
Operations Interfaces 6
Overview 6
This section presents the operations interfaces that support technician and
provisioning access to the DDM-2000 OC-12 Multiplexer and allow alarms and
status information generated by the system to be reported.
Operations interfaces include:
■ Two EIA-232-D craft interface terminal (CIT) interfaces
■ User panel controls and indicators
■ Equipment status indicators
■ Office alarms
■ TL1/X.25 interface to an alarm surveillance OS, such as Bellcore's Network
Monitoring and Analysis (NMA), Operations Systems/Intelligent Network
Elements (OPS/INE), and Lucent Technologies ITM SNC (Integrated
Transport Management SubNetwork Controller)
■ IntrAOffice LAN (IAO LAN) interface ITM SNC
■ User definable miscellaneous discrete environmental alarms and controls
■ Order Wire.
Complete detailed information on the OS interfaces is provided in 824-102-151,
DDM-2000 Multiplexers Operations Systems Engineering Guide
.