Lucent Technologies DDM-2000 OC-12 - Page 36

Tables
Issue 1 December 1997 xxxvii
10-5 21G/21G-U and 21D/21D-U OLIU Link Budgets 10-10
10-6 OC-3 OLIUs Link Budget—Multimode Operation 10-12
10-7 23G/23G-U and 23H/23H-U OLIU
Specifications 10-14
10-8 23G/23G-U and 23H/23H-U OLIU Link Budgets 10-15
10-9 OC-3 Rate OLIU Mixes - Minimum Link Budgets 10-17
10-10 OC-3 Rate OLIU Mixes — Maximum Link Budgets
for SM Fiber (dB) 10-19
10-11 OC-3 Rate OLIU Mixes—Maximum Link Budgets
for MM Fiber (dB) 10-20
10-12 Universal Buildout Attenuators 10-21
10-13 OC-12 Multiplexer and OC-12 Regenerator
Transmission Delay in Microseconds 10-24
10-14 Performance Monitoring Parameters Provisionable
via the CIT 10-25
10-15 CIT Interface Pin Connection 10-26
10-16 TL1/X.25 Interface — VC Assignments 10-31
10-19 TL1/X.25 Interface — EIA-232-D Pin
Connections 10-32
10-17 TL1/X.25 Interface — X.25 Packet Layer
Parameters 10-32
10-18 TL1/X.25 Interface — LAPB Link Layer
Parameters 10-32
10-20 Power Dissipation and Current Drains 10-36
10-21 DDM-2000 OC-12 System Reliability Prediction 10-40
10-22 DDM-2000 OC-12 Circuit Pack Reliability 10-41
10-23 DDM-2000 Fan Shelf Steady State Failure Rates
(Based on Bellcore RPP Issue 4 Data) 10-41
11 Commands and Reports
11-1 DDM-2000 OC-12 Address Table 11-4
11-2 DDM-2000 OC-12 Command Menu 11-10
11-3 RTRV-ALM Descriptions 11-359
11-4 RTRV-HSTY Descriptions 11-375