Lucent Technologies DDM-2000 OC-12 User Manual

INIT-SYS 7of4Page INIT-SYS
all addressThe all installationanofendtheatonlyusedis
allthatensuresThissystem.theoverturningbefore
valuesdefaultproperthehavesystemtheinparameters
done.isprovisioningsystem-specificanybefore
!
CAUTION:
addressThe all anonusedbeNOTshould
system.in-service
NOTE:
The init-sys:all toavailableiscommand
only.usersprivileged
underlistedparameterstheallinitializesparameterThis
sysctl following:thePLUS
Loopbacks
opr-lpbk-ec1
opr-lpbk-t3
Cross-connections
dlt-crs-sts1
ent-crs-sts1
thresholdsdegradesignalOC-12/OC-3
set-oc12
set-oc3
set-ec1
set-sts1
thresholdsfailureSignal
set-t3
set-ec1
set-state-ec1
set-state-t3
(SwitchingProtection manual)
switch-fn
switch-line
switch-sync
OptionsFeature
set-feat
(TID)nameSystem
set-ne
PMN
set-attr-alm
11-78 1997December1Issue OC-12DDM-2000

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English