Lucent Technologies DDM-2000 OC-12 User Manual

INIT-SYS 7of5Page INIT-SYS
7.0ReleaseOC-12In—IdShelfandIdNEId,Site
IdNEandIdSitethereleases,TARPlaterand
notarethereforeandavailable,benotwillparameters
command.thisbyaffected
set-ne
7.0ReleaseOC-12In—selectionCO/RTandTBOS
willparameterTBOSthereleases,TARPlaterand
affectedbenotwillitthereforeandavailable,benot
command.thisby
set-ne
DCConsettingsUserSide/NetworkSide
LANIAOChannelDCC
set-fecom
addresstheenteringparameters,initializingtoadditionIn all will
failureForalarms.anddatamonitoringperformanceallclear
alarmstheinitialized,areparametersafterexiststillthatconditions
thisbyaffectednotareparametersdateandTimeredeclared.bewill
command.
anExecuting init-sys:sysctl thesetwillequippedpacksTGSnowith
values:defaulttoparametersfollowing
OptionsFeature
and7.0ReleaseOC-12In—(DSNE)ElementNetworkServicesDirectory
theofpartbenotwillparameterDSNEthereleases,TARPlater set-ne
thisbyaffectedbenotwillthereforeandparameters,provisioning
command.
(TID)nameSystem
PMN
TARPlaterand7.0ReleaseOC-12In—IdShelfandIdNEId,Site
theofpartbenotwillparametersIdNEandIdSitethereleases, set-ne
thisbyaffectedbenotwillthereforeandparameters,provisioning
command.
thereleases,TARPlaterand7.0ReleaseOC-12In—AddressTBOS
theofpartbenotwillparameterAddressTBOS set-ne provisioning
command.thisbyaffectedbenotwillthereforeandparameters,
thereleases,TARPlaterand7.0ReleaseOC-12In—EnabledTBOS
theofpartbenotwillparameterEnabledTBOS set-ne provisioning
command.thisbyaffectedbenotwillthereforeandparameters,
TBOSthereleases,TARPlaterand7.0ReleaseOC-12In—linkTBOS
theofpartbenotwillparameterlink set-ne andparameters,provisioning
command.thisbyaffectedbenotwilltherefore
OC-12DDM-2000 1997December1Issue 11-79

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English