Lucent Technologies DDM-2000 OC-12 User Manual

RLS-LPBK-EC1 1of1Page RLS-LPBK-EC1
NAME
Release-Loopback-EC1rls-lpbk-ec1:
FORMATINPUT
rls-lpbk-ec1: Address [:lpbktype= LoopbackType ];
DESCRIPTION
low-speedaonloopbackestablishedpreviouslyareleasescommandThis
interface.STS1E
are:parametersinputThe
Address released.betoisloopbackawhereport(s)EC-1ofAddress
Addresses:PortEC-1Valid {a,b,c,d}-{1-3,all}all,
lpbktype facilityorterminalisloopbackthewhetherspecifiesloopbacktype
terminal speedhighthetowardsdirectedloopbackterminal
value.defaultaisThisfacility.
facility DSX.thetowardsdirectedloopbackfacility
areleasetoattemptsusertheIf facility addressvalidaattypeloopback
aonlywhen terminal toattemptsorestablished,beenhastypeloopback
arelease terminal aonlywhenaddressvalidaattypeloopback facility
followingtheanddeniedbewillattempttheestablished,beenhastypeloopback
displayed:messagedenial
FORS
/*deliaFnoitarepOdetseuqeR,sutatS*/
/*.tsixetonseodkcabpooldeificepS*/
COMMANDSRELATED
opr-lpbk-ec1
11-104 1997December1Issue OC-12DDM-2000

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English