Lucent Technologies DDM-2000 OC-12 - Page 522

RLS-LPBK-T3 1of1Page RLS-LPBK-T3
NAME
Release-Loopback-T3rls-lpbk-t3:
FORMATINPUT
rls-lpbk-t3: Address [:lpbktype= LoopbackType ];
DESCRIPTION
anbyestablishedpreviouslyportDS3aonloopbackareleasescommandThis
opr-lpbk-t3 command.
is:parameterinputThe
Address released.betoisloopbackawhereport(s)DS3ofAddress
Addresses:PortDS3Valid {a,b,c,d}-{1-3,all}all,
lpbktype facility,orterminalisloopbackthewhetherspecifiesLoopbacktype
values:followingtheofonehasand
terminal speedhighthetowardsdirectedisloopbackterminal
value.defaulttheisThisfacility.
facility DSX-3.thetowardsdirectedisloopbackfacility
denialfollowingtheaddress,thewithconsistentnotistypeloopbacktheIf
displayed:ismessage
SVNS
/*etatSdilaVnitoN,sutatS*/
/*.sserddaehthtiwtnetsisnoctonsiepytkcabpool*/
COMMANDSRELATED
opr-lpbk-t3
OC-12DDM-2000 1997December1Issue 11-105