Lucent Technologies DDM-2000 OC-12 User Manual

RTRV-T3 4of3Page RTRV-T3
State values:thewithporttheofstatetheisState
is DSX-3thefromsignalT3validAIn-service.
monitored.beingis
auto validaforwaitingissystemTheAutomatic.
DSX-3.thefromsignalT3
nmon MonitoredNot
ModePM (PM)monitoringperformancetheshowscolumnThis
theofonebemayandinterface,DS3theofmode
values:following
on value).(defaultportthisonenabledPMDS3
off isdata(PMportthisondisabledPMDS3
reported).ormonitorednot
becausePMpathDS3noIndicates— cc was
forselected Mode willreportPMDS3The.
(-)linesdashanddataPMlinethedisplay
dataPMpathDS3theofdirectionsbothfor
(in-service)activeispackBBG11Bawhen
slot.unitfunctionain
FramePM theforframingoftypetheindicatesparameterThis
DSX-3.theandfiberthebothfromsignalDS3incoming
willparameterthispack,circuitTMUXBBG20theFor
thefromreceivedisthatsignalDS3oftypetheindicate
ItDSX-3.thetowardstransmittedisandonlyDSX-3
values:followingtheofonehavemay
m13 framingM13inissignalDS3incomingThe
value).(defaulttype
cbit framingC-bitinissignalDS3incomingThe
type.
becausePMpathDS3noIndicates— cc was
forselected Mode willreportPMDS3The.
(-)linesdashanddataPMlinethedisplay
dataPMpathDS3theofdirectionsbothfor
(in-service)activeispackBBG11Bawhen
slot.unitfunctionain
11-214 1997December1Issue OC-12DDM-2000

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English