Lucent Technologies DDM-2000 OC-12 User Manual

RTRV-T3 4of4Page RTRV-T3
FormatPM thatPMONpathoftypetheindicatesparameterThis
willparameterThisreport.PMDS3theinappearwill
theifonlyappear vmr or vm beenalreadyhasmode
thispack,circuitTMUXBBF20theForselected.
mayparameterThisappear.alwayswillparameter
values:followingtheofonehave
pbit PMDS3theselected,isvaluethisWhen
aswellasSEFSofcountsdisplaywillreport
(defaultUASandSES,ES,CV,P-bitDS3
value).
fmbit PMDS3theselected,isvaluethisWhen
aswellasSEFSofcountsdisplaywillreport
andSES,ES,CV,bitF&MadjustedDS3
UAS.
cpbit PMDS3theselected,isvaluethisWhen
aswellasSEFSofcountsdisplaywillreport
CV,far-endandnear-endparityCP-bitDS3
UAS.andSES,ES,
becausePMpathDS3noIndicates— cc was
forselected Mode willreportPMDS3The.
(-)linesdashanddataPMlinethedisplay
dataPMpathDS3theofdirectionsbothfor
(in-service)activeispackBBG11Bawhen
slot.unitfunctionain
COMMANDSRELATED
set-state-t3
set-t3
OC-12DDM-2000 1997December1Issue 11-215

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English