Lucent Technologies DDM-2000 OC-12 User Manual

SET-T3 4of3Page SET-T3
cbit dsx-3theandfiberthebothfromsignalDS3incomingThe
type.framingC-bittheofis
fmt thesetsandparametersFrameandPMModethesupportsFormat
Thisreport.PMDS3theinappearwillthatPMONoftype
theifonlyappearwillparameter vmr or vm alreadyhasmode
theIfselected.been cc willparameterstheseselected,ismode
theofonehavemayparameterThisuser.thetovisiblebenot
values:following
pbit willreportPMDS3theselected,isvaluethisWhen
ES,CV,P-bitDS3aswellasSEFSofcountsdisplay
forvalidisoptionThisvalue).(defaultUASandSES,
both frame types.
fmbit willreportPMDS3theselected,isvaluethisWhen
bitF&MadjustedDS3aswellasSEFSofcountsprovide
bothforvalidisoptionThisUAS.andSES,ES,CV,
frame types.
cpbit willreportPMDS3theselected,isvaluethisWhen
CV,parityCP-bitDS3aswellasSEFSofcountsprovide
(FEBE)far-endandnear-endbothforUASandSES,ES,
forONLYvalidisoptionThisdata. cbit oftype frame.
entry:commandafterdisplayedbewillmessageconfirmationfollowingThe
.ecivrestceffayamdnammocsihtfonoitucexE!noituaC*/
:sretemarapesehthtiwdnammoc3t-tesehtdetcelesevahuoY
=sserddA
x
=edoM x
=langiSnoitacidnImralA x
=leveLmralA x
=dlohserhTeruliaF x
=edoMMP x
=tamroF x /*
=)tiuqoteteLED/lecNACron/y(?etucexE
NOTE:
if(AIS)signalindicationalarmtheforpromptonlywilldisplayaboveThe
tosetisModethe cc PMModetheforpromptonlywilldisplayaboveThe.
tosetisparameterModetheifFormatand vmr or vm.
OC-12DDM-2000 1997December1Issue 11-317

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English