M. J. MAILLIS GROUP SIAT BeeWrap User Manual

9
IDM 510-004-3
Safety information
English languageOperation and maintenance manual
Safety Warnings for Maintenance and Adjustments
– Always keep the machine in optimum operating condition and carry out the routine
maintenance according to the intervals and procedures specied by the Manufacturer.
– A good maintenance will ensure a stable performance over time, longer working
life and constant compliance with the safety requirements.
– The personnel authorized to carry out the ordinary maintenance must have qualied
expertise and specic skills in the eld of intervention.
– Any work on the electrical system must ONLY be performed by technicians with ac-
knowledged, eld-specic skills.
– Mark the intervention area and prevent access to the devices that, if activated, may
cause unexpected hazards and jeopardize the safety level.
– According to the type of operation to carry out, wear the Personal Protective Equip-
ment listed in the “Instructions for use” and that indicated by the Labour laws.
– Respect the SAFETY WARNINGS. Avoid any IMPROPER USE of the machine and
assess the RESIDUAL RISKS.
– Before carrying out any intervention, activate all the safety measures, and assess any
residual energy which may still be present.
– Interventions to not easily accessible or dangerous areas shall be carried out ONLY
after arranging the required safety conditions.
– Carry out the interventions ONLY according to the modes recommended by the Man-
ufacturer in the “Instructions for use”.
– All operations must be carried out ONLY with suitable tools which shall be in good
condition, in order to avoid damaging any components and parts of the machine.
– Replace the components and/or safety devices ONLY with original spare parts in order
not to alter the required safety level.
– The use of similar but not genuine spare parts can lead to non-compliant repairs, im-
paired performance and economic damage.
– Use the lubricants (oils and greases) recommended by the Manufacturer or lubricants
of equivalent chemical and physical characteristics.
– At work completion, restore all the security conditions aimed to prevent and minimize
the risks during the human-machine interaction.
– At the end of operations check that there are no other tools or other material near the
moving parts or in dangerous areas.
– Refer to the Technical Assistance Service of the Manufacturer, in case interventions
not described in the “Instructions for use” are needed.
– All EXTRAORDINARY MAINTENANCE interventions shall be performed only by au-
thorized Technicians with proven and gained experience in the eld.
– The non-compliance with the information provided herein may lead to risks for
the safety and health of the persons involved and may also lead to economic
damages.

M. J. MAILLIS GROUP SIAT BeeWrap Specifications

General

Brand	M. J. MAILLIS GROUP
Model	SIAT BeeWrap
Category	Stretch Wrapping Systems
Language	English