Safety information
10
IDM 510-004-3
English language Operation and maintenance manual
Safety warnings for the electrical equipment
The electrical equipment has been built in accordance with the applicable stand-
ards and its efciency is ensured if the listed conditions are met.
– Ambient temperature and relative humidity between maximum and minimum permitted
limits.
– Absence of environmental electromagnetic noise and radiation (X-rays, laser, etc.).
– Absence of environment areas with gas and dust concentration levels potentially ex-
plosive and/or at risk of re.
– Use of products and materials free from contaminants and corrosive agents.
– Products containing chemicals, acids, salts, etc. can come into contact with the elec-
trical components and cause irreversible damage.
– Transport and storage temperatures between minimum and maximum permitted limits.
– Altitude not exceeding the maximum permitted limits.
– Installation at altitudes higher than the permitted values will affect the efciency of
electrical and electronic components.
– Power Cable with section suitable for the current power and intensity values indicated
in the data plate.
– Protection class in accordance with data plate indications.
– The power supply line to which the machine must be connected must have identical
characteristics to those mentioned in the data plate.
Important
All the listed requirement values are contained in the technical specications table.
– If one or more of the listed requirements cannot be met, alternative solutions
should be agreed at the ordering stage.
Safety warnings for the environmental impact
Each organization is responsible for implementing procedures aimed at identify-
ing, evaluating and controlling the environmental impact of its own activities (prod-
ucts, services, etc.).
– Procedures for identifying signicant environmental impact must take account of the
factors listed.
- Emissions in the atmosphere
- Discharged liquids
- Waste disposal
- Soil contamination
- Use of raw materials and natural resources
- Local problems related to the environmental impact
– In order to minimize the environmental risks during the man-machine interaction follow
the recommended instructions.
- Dispose of all packing in accordance with the laws in force in the country of installa-
tion.
- Make sure that the installation area has a suitable ventilation to avoid the concentra-
tion of unhealthy air for the Operators.
- Keep noise level to the minimum to reduce noise pollution.
- Select materials on the basis of their composition and provide for differentiated dis-
posal in accordance with the laws in force.
To Next Page
Loading...
Need help?
General