43
IDM 510-006-5
Maintenance
English languageOperation and maintenance manual
Recommendations for maintenance interventions
– The personnel authorized to carry out the ordinary maintenance must have qualied
expertise and specic skills in the eld of intervention.
– Any work on the electrical system must ONLY be performed by technicians with ac-
knowledged, eld-specic skills.
– Mark the intervention area and prevent access to the devices that, if activated, may
cause unexpected hazards and jeopardize the safety level.
– According to the type of operation to carry out, wear the Personal Protective Equip-
ment listed in the “Instructions for use” and that indicated by the Labour laws.
– Before carrying out any intervention, activate all the safety measures, and assess any
residual energy which may still be present.
– Carry out the interventions ONLY according to the modes recommended by the Man-
ufacturer in the “Instructions for use”.
– All operations must be carried out ONLY with suitable tools which shall be in good
condition, in order to avoid damaging any components and parts of the machine.
– At work completion, restore all the security conditions aimed to prevent and minimize
the risks during the human-machine interaction.
– At the end of operations check that there are no other tools or other material near the
moving parts or in dangerous areas.
– Refer to the Technical Assistance Service of the Manufacturer, in case interventions
not described in the “Instructions for use” are needed.
– In order to avoid safety hazards for the operators and nancial losses, follow not
only the recommendations but also the information in the SAFETY WARNINGS
section.
To Next Page
Loading...
Need help?
General