M. J. MAILLIS GROUP SIAT BeeWrap User Manual

17
IDM 510-006-5
Technical Specications
English languageOperation and maintenance manual
Cycle
The gures show the operating cycle with indication of the main operating areas.
Stage Ê
– Approach the machine to the pallet until touching the
feeler.
– Tie the trailing end of the lm to the base of the prod-
uct to be wrapped.
Stage Ë
– Start the wrapping cycle that will be performed based
on the previously set parameters.
– The machine moves clockwise around the product
and stops once it nishes wrapping it.
Stage Ì
– Manually cut the lm and cause it to adhere to the
wrapped product.
– The machine is ready for a new wrapping cycle.

M. J. MAILLIS GROUP SIAT BeeWrap Specifications

General

Brand	M. J. MAILLIS GROUP
Model	SIAT BeeWrap
Category	Stretch Wrapping Systems
Language	English