Technical Specications
20
IDM 510-006-5
English language Operation and maintenance manual
– Risk of crushing upper limbs: do
not introduce or place upper limbs in/
next to any machine moving parts
during operation.
– The risk mainly relates to the area
between the sliding column and the
reel holding carriage.
Incorrect uses that are reasonably expected
Improper use: reasonably foreseeable use different from what is specied in the use
manual, that may be caused by human behaviour.
– ONLY trained, documented and authorized Operators are allowed to use the machine.
– DO NOT use or allow other persons to use the machine for purposes and in ways dif-
ferent from what specied by the Manufacturer.
– NEVER use the tool if the scheduled maintenance interventions have not been carried
out accordingly
– DO NOT use the machine in unstable, uneven, sloping and unsuitably protected areas
to prevent the risk of capsizing or falling.
– DO NOT enable the wrapping cycle during road, rail or sea transport (even if the
means is not moving).
To be used on naval means, carefully assess its stability to be able to operate in
safe conditions.
– DO NOT use the machine in places that are at risk of re and / or explosion.
– Do not use the machine as a means to transport people or things.
– When the products are wrapped, the radius of action of the machine must be kept free
from people.
– DO NOT carry out any intervention when the machine is being operated. Stop the
machine and put it in safety condition before carrying out any intervention.
– DO NOT clean or wash the machine using aggressive products that may damage its
components.
– DO NOT leave the machine unattended during operation and DO NOT leave it at the
end of the work without stopping it to safety conditions.
To Next Page
Loading...
Need help?
General