13
IDM 510-006-5
Technical Specications
English languageOperation and maintenance manual
general description of the machine
The semiautomatic robot series BeeWrap is a machine designed and built to stabi-
lise palletised products with stretch lm.
– The products to be wrapped must be contained in packages (cases, containers for
liquids, etc.) having a regular shape or in any case, such as to allow for stable palletis-
ing.
– The containers of liquids or uids should be hermetically sealed and with suitable char-
acteristics to avoid spilling any content.
– To wrap loads, commercially available reels of stretch lm are used.
– The machine has been designed, built and equipped by applying integrated safety
principles.
– The machine is for professional use only and must be used in industrial-type settings
- factories or workshops.
– The premises must have no areas with gas and dust concentration levels that are po-
tentially explosive and/or at risk of re.
– The working area must be at (no slopes), compact and smooth to allow for easy and
safe movement of the machine.
– On request, the machine may be equipped with accessories, either when it is ordered
or later.
See “Optional Accessories” for further details.
– The machine must be used by one single operator ONLY, who must be trained and
capable of performing the work and be in suitable conditions.
– The operator must programme the wrapping cycle, start and monitor the operating
cycle and control the machine stops (pause, emergency, etc.).
– The operator must also change the lm reel, carry out the battery charge procedures
and the scheduled maintenance operations.
To Next Page
Loading...
Need help?
General