MA NC-6000 User Manual

NC-6000
Compact Two Pockets Currency Discriminator
Service Manual
Document Version 1.0
Oct 1
st
, 2012
Masterwork Automodules Tech Corp Ltd.
11F-3, 3, Park St., Nangang, 11503, Taipei, Taiwan
support@automodules.com
COPYRIGHT © 2011 Masterwork Automodules Tech Corp Ltd.
All rights reserved. This Document or any part thereof may no, without the prior
written consent of Masterwork
Automodules Tech Corp Ltd., be copied, reprinted or
reproduced in any material form including, but without prejudice to the foregoing
and not by way of exception photocopying, transcribing, transmitting or storing in
any medium or translating into any lang
uage, in any form or by any means,
including but not limited to, electronic, mechanical, xerographic, optical, magnetic,
digital or other methodology.

MA NC-6000 Specifications

General

Power Supply	AC 100-240V, 50/60Hz
Batch Function	Yes
Add Function	Yes
Stacker Capacity	200 notes
Display	LCD
Detection	UV, MG, IR
Supported Currencies	Multi-currency
Counting Speed	1, 000 notes/min

Summary

Introduction

About NC-6000 Service Manual

Overview of the service manual's scope and content.

Important Safety Precaution

Critical safety guidelines for operating and maintaining the NC-6000.

Abbreviations and Acronyms

Glossary of common abbreviations and acronyms used in the manual.

Contact Information

Details for contacting Masterwork Automodules Tech Corp Ltd. for support.

NC-6000 Outline

NC-6000 At A Glance

Visual identification and overview of the NC-6000's main components and features.

Specification

Detailed functional, mechanical, and electrical specifications of the NC-6000.

Interface Specification

Technical details for connecting external devices like printers and PCs via interfaces.

System Overview

Block diagram and component relationships within the NC-6000 system.

Maintenance

Cleaning the Cover of NC-6000

Step-by-step instructions for cleaning the exterior surfaces of the NC-6000.

Cleaning the bill path of NC-6000

Procedures for cleaning the internal bill path and sensors to ensure proper operation.

Maintenance Mode

Test Run – Simple Mode

Testing feeding process using IR sensors in simple mode with value list and waveform.

Test Run - Strict Mode

Testing feeding process with IR array and sensors in strict mode with value list and waveform.

Upgrade Mode

Procedures for upgrading firmware using an SD card for the NC-6000.

Calibration Mode

Guide for calibrating various sensors and parameters of the NC-6000.

IR Mode

Checking the status and reaction of IR sensors and triggers.

Test Device

Procedures for testing the functionality of various components like solenoids, motors, and displays.

Machinery Info

Displays production date, serial number, and firmware versions of the machine.

Setup Device Parameters

Changing machine settings like pocket capacity, speed, detection level, and printer type.

NC-6000 Part List and Disassembly

Tool Preparation

List of tools required for disassembly and assembly procedures.

Housing

Disassembly instructions for the machine's outer housing components.

Total Assembly

Overview of the main modules constituting the NC-6000 machine.

Upper Bill Path Module Components

Part list and disassembly for the upper bill path mechanism.

Control Panel Module Components

Part list and disassembly for the control panel assembly, including PCBs and display.

Stacker Module Components

Part list and disassembly procedures for the stacker and reject pocket components.

Bottom Conveyor Module Components

Part list and disassembly for the bottom conveyor system and its associated boards.

Base Module Components

Comprehensive part list and disassembly for various components within the base module.

Trouble Shooting

Definition of Message Codes

Explanations for various error and status message codes displayed by the NC-6000.

Error

Specific troubleshooting steps for motor errors and other operational faults.