MA NC-6000 - Top Cover-ONE and TWO

Service Manual – NC-6000 Date: OCT 1
st
, 2012 (Version 1.0)
Masterwork Automodules Tech. Corp., Ltd
Confidential
- 36 -
5. Disassemble the Side Panel-R from the machine.
*Note: When assembling the side cover, please make sure
the plastic cover and metal plate fitted to each other.
6. Repeat the steps 1 to 5 to dismount the Side Panel-L.
*Note: Please notice the same as above when assebling the
side panel-L.
5.2.2 Top Cover-ONE and TWO
1. Loosen the two screws (M3x5-Countersunk) on the
right side of top cover.
2. Loosen the two screws (M3x5-Countersunk) on the left
side of top cover.
3. Disassemble top cover ONE and TWO from the
machine.