MA NC-6000 - Lid Back-Frame; Back Cover

Service Manual – NC-6000 Date: OCT 1
st
, 2012 (Version 1.0)
Masterwork Automodules Tech. Corp., Ltd
Confidential
- 37 -
5.2.3 Lid Back-Frame
1. Loosen the two screws (M3x5-Countersunk) on the Lid
Back-Frame of right sides.
2. Loosen the another two screws (M3x5-Countersunk) on
the left side.
*Note: When assembling the Lid Back-Frame, please
organize the cable of motor baord to prevent damage on the
cable.
3. Disassemble Lid Back-Frame from the machine.
5.2.4 Back cover
1. Loosen the screws (M3x5-Countersunk) on the both
sides of back cover.