MA NC-6000 - Test LCD; Test Key; Test Fan; Test Sound

Service Manual – NC-6000 Date: OCT 1
st
, 2012 (Version 1.0)
Masterwork Automodules Tech. Corp., Ltd
Confidential
- 27 -
4.6.3 Test LCD
Testing the functionality of LCD display.
1. Highlight the option and press “ ” key.
2. The display shows RED, GREEN and BLUE
continually, then it goes back to the test mode.
4.6.4 Test Key
Testing the functionality of each key.
1. Press a key, the key number shows on the top left
side of the screen.
2. When pressing different key, a reaction number
shows on the display.
4.6.11 Test Fan
Testing the functionality of fan.
1. Highlight the option and press “ ” key.
2. The fan starts running. Put a hand on the back
side of the device to feel if the fan works properly.
3. Press “ ” key again to stop it.
4.6.12 Test Sound
Testing the functionality of sound.
1. Highlight the option and press “ ” key. A testing
sound can be heard.