MA NC-6000 - Timing Belts; Reject Pocket Note Holder

Service Manual – NC-6000 Date: OCT 1
st
, 2012 (Version 1.0)
Masterwork Automodules Tech. Corp., Ltd
Confidential
- 72 -
5.3.5.1 Timing Belts
1. Turing the gear (A) and pulling out the timing belt from
the gear (B) to release the timing belt 160mm-S2M.
2. Use the same way as the first step to release the timing
belt 189mm-S3M from the gears.
3. Repeat the disassembly way to release the timing belt
225mm-3M from the gears.
*Note: When assembling the drive belt, please make sure
the rollers are in correct positions.
5.3.5.2 Reject Pocket Note Holder
1. Push the reject pocket note holder from sides and release
it from the tenon.
The rubber part
aligns the
lower part of the hopper
set.
全部露出
The rubber part of the
roller shall align to the
hopper set.
A
B
A
B
A
B