MA NC-6000 - Run - Wavform; Test Solenoid & Brake

Service Manual – NC-6000 Date: OCT 1
st
, 2012 (Version 1.0)
Masterwork Automodules Tech. Corp., Ltd
Confidential
- 15 -
4.1.2 Run – Wavform
To check the gap adjustment by using the graphic wave formed by the retrieved
value.
1. Enter “Run – Wavform” by press the “ ” after
selecting on the item.
2. Place a bundle of 50 pcs test notes
(Denomination: 1USD) on the hopper and pull the
hopper guide to fix the size of test note. The
machine starts running once it detects notes on
the hopper.
Note: The distance of two sides from hopper to banknote
shall be around 3mm to 5 mm.
3. The wave shall be drowned around the white line
*Note: The information on Wave Form is for reference only,
please base on the information from VALUE LIST to test
and to adjust gap.
4. Press the “Move down” key to switch to next page
and see the wave form of distance.
*Note: The information on Wave Form is for reference only,
please base on the information from VALUE LIST to test
and to adjust gap.
4.1.3 Test Solenoid & Brake
To test the functionality of solenoid and brake (Manually start).
Place a bundle of 50 pcs (Denomination: 1USD) test
notes on the hopper and pull the hopper guide to fix the
size of test note. The machine starts running once it
detects notes on the hopper.
Note: The distance of two sides from hopper to the edge of
banknote shall be around 3mm to 5 mm.
Press the “ ” to
activate the solenoid & Brake
function.