MA NC-6000 - Power Tray; Motor a and B

Service Manual – NC-6000 Date: OCT 1
st
, 2012 (Version 1.0)
Masterwork Automodules Tech. Corp., Ltd
Confidential
- 80 -
5.3.5.11 Power Tray
1. Loosen the two screws (M3x5-Countersunk
)on the
power tray
2. Pull out the power tray from the machine.
*Note: Please organize the cable on the correct position
when assembling the pwer tray back.
3. The power tray is now removed from the machine.
5.3.5.12 Motor A and B
1. Loosen the screws (M3x6-
Round head w/ spring
washer) of the motor cover on the right side of the
machine.
Motor A
Motor B