Service Manual – NC-6000 Date: OCT 1
st
, 2012 (Version 1.0)
Masterwork Automodules Tech. Corp., Ltd
Confidential
- 5 -
Chapter 1 Introduction
1.1 About NC-6000 Service Manual
This manual is for the maintenance of NC6000 and it includes the disassembly
process, spare part replacement, basic inspection and repair.
1.2 Important Safety Precaution
• NC-6000 is exclusively for indoor usages only, please do not use or install it
outdoor.
• Please check the adaptor and power cord periodically to protect from any
damages. The power source is between AC 100 - 240V, 50/60 Hz.
• Keep NC-6000 away from magnets, activated cellular phones, electrical
appliances, or speakers within 13 cm/ 5 inches.
• Please disconnect power adaptor and remove batteries when the machine
left unused for a long time.
• NC-6000 is designed for notes processing. Please process banknotes
ought to be verified in the four orientations (“Head Up-Right”, “Head
Reversed”, “Tail Up-Right” or “Tail Reversed”).
1.3 Abbreviations and Acronyms
IR Infrared
MA Masterwork Automodules
MB Megabyte
MG Magnetic
MR Magnetoresistive
MT Metal Thread
PC Personal Computer
USB Universal Serial Bus
UV Ultraviolet
To Next Page
Loading...