MA NC-6000 - Capacity of Pockets; Speed Mode

Service Manual – NC-6000 Date: OCT 1
st
, 2012 (Version 1.0)
Masterwork Automodules Tech. Corp., Ltd
Confidential
- 30 -
*Note: It’s suggested to use default setting on the
device.
4.8.1 Capacity of pockets
To change the default capacity of pockets.
1. To change the maximum capacity of banknote for
reject pocket.
 Options: 5, 10, 15, 20, 25, 30
2.
To change the maximum capacity of banknote for
stacker.
 Options: 50, 100, 150, 200, 250, 300, 350, 400
*Factory Deault Setting:
-Pocket Up (reject pocket): 30
-Pocket Down (stakcer): 250.
4.8.2 Speed mode
To change the setting of speed.
1. Highlight the desired speed mode and press “ ” to
change the low, normal and high mode speed
settings.
 Options: 600, 650, 700, 750, 800, 1000, 1200.
2.
Press “Save” to keep the change of setting and
press “Exit” to go back to the upper layer.
*Factory Deault Setting for Detection and SN
*Factory Deault Setting for
mode:
- low 600, normal 800, high 1000.
Count mode:
- low 600, normal 1000, high 1200.