MA NC-6000 - Bottom Conveyor Plate

Service Manual – NC-6000 Date: OCT 1
st
, 2012 (Version 1.0)
Masterwork Automodules Tech. Corp., Ltd
Confidential
- 64 -
1. Open the back lid.
2. Release the back lid connector from the back lid.
3. Release the E-ring (Ø4) from the both side of shaft
4. The back lid is now removed.
5.3.4.1 Bottom Conveyor Plate
1. Loosen the screw (M4x6-Round Head) on the both side.
Left Side
Right Side