MA NC-6000 - PCB NC6000-MOTOR Board

Service Manual – NC-6000 Date: OCT 1
st
, 2012 (Version 1.0)
Masterwork Automodules Tech. Corp., Ltd
Confidential
- 79 -
5.3.5.10 PCB NC6000-MOTOR Board
1. The NC6000-Motor board is on the left side of the
machine
2. Disconnect the cables from the NC6000-Motor board.
*Note: The following are the positions of cables to the
corresponded connecter.
3. Loosen the four screws (M3x6-Rround Head with spring
washer) on the NC6000-Motor board.
4. The NC6000-Motor board is now free to be removed.
Left Side
Power
P5
INTJ3 DC_IN
Fan
Motor
P6
P8
P4